Aluminum radiator RPG racing / radiator for Yamaha Aerox
Especially for the Yamaha Aerox there is probably no better-known tuning part like our RPG radiator, which was specially developed for the Aerox / MBK Nitro. Through our water cooler, with Every setup And at Every weather, Always the Optimal temperature Be guaranteed.
Improvements compared to the original
With brute 2320cm³ cooling volume, nobody will be disappointed here!
A big advantage over other coolers are ours Thermal baffles. These prevent that heat build-up forms behind the radiator and ensure that the warm air can escape directly from the cooling area.They also help with assembly in other vehicles and are at work Vibration damping rubbers fitted.
Plug & Play
The development turned out to be quite difficult and time-consuming until we got this monster under the front fairing. For us it was important for the assembly No noticeable changes to frames, Or disguise must be made. No holders need to be made or suitable screws found. The cooler can Without much effort, Plug & Play are installed. Only the bracket from the horn and the original headlights have to be dispensed with. A "tuning" headlight can help here.
All our coolers are made of high quality aluminum Welded by hand. Each and every one of them was placed in a plunge pool, underwater, by means of compressed air before shipping Leakage checked. So we can also meet the highest quality standards and are happy about one 0% return rate.
Why a bigger cooler?
The optimum temperature of a 2-stroke engine is 55-60 °. Anything outside this range means loss of performance and/or increased wear. But be careful! If the outside temperatures are too low or the engine power is too low, it may be necessary to reduce the cooling capacity, for example by taping off, in order to be in the optimal range again.
Scope of delivery
-2x vibration damper
-All necessary screws and nuts